Page 34 - koreatechnics

HSD-V 3×D

DRILLING

● Shank ISO9766, Parallel with clamping flat

Code No. 치수 Dimension(mm) 인서트 부품 Component
HSD-V13030D S20 Insert Screw T-Driver
HSD-V13530D S20 D L1 L Ds Ls WCMX03T104
HSD-V14030D S20 13.0 42 50 TSB-18045
HSD-V14530D S20 13.5 44 112 WCMX030204
HSD-V15030D S20 14.0 45 114 56 TXL-6
HSD-V15530D S25 14.5 47 115 TSB-22045
HSD-V16030D S25 15.0 48 117 20
HSD-V16530D S25 15.5 50
HSD-V17030D S25 16.0 51 118
HSD-V17530D S25 16.5 53 120
HSD-V18030D S25 17.0 54 132
HSD-V18530D S25 17.5 56 134
HSD-V19030D S25 18.0 57 135
HSD-V19530D S25 18.5 59 137
HSD-V20030D S25 19.0 60 138 25
19.5 62 140
20.0 63 141
143
144

● HSD-V 중 ・ 대구경 드릴의 특징

•STD-V 중 ・ 대구경(ø20.5~ø80)드릴은 최적의 설계로 칩 배출 공간을 대폭 확장 시켰습니다.
깊은 홀 가공에서도 드릴링이 안정되고, 표면조도가 우수합니다.

•최적의 결과물을 위해, 절삭조건표(124페이지)와 절삭유 적정 압력을 확인해 주세요.
(절삭유 적정압력은, HSD-V 2×D,3×D일때 3kg/㎠이상, 4×D일때 4kg/㎠이상)

● The characteristic of HSD-V middle and big diameter drills

•The chip discharging space for HSD-V middle dia and big dia drill(ø20.5~ø80)was greately extended.
These drills are stable and surface roughness are excellent in the deep hole drilling also.

•Please make sure the proper oil pressure and the cutting data(P.124)for the best performance.
(The proper pressure for HSD-V 2×D,3×D is over 3kg/㎠, the proper pressure for 4×D is over 4kg/㎠)

max. D = D + 2 × Adjustment

By offsetting a non-rotating drill
in the direction of the outside
cutting edge, holes lager than
the tool’s nominal diameter can
be produced

32 www.koreatechnics.com