Page 29 - koreatechnics

STD-V 4×D

DRILLING

● Shank ISO9766, Parallel with clamping flat

Code No. 치수 Dimension(mm) 인서트 부품 Component
D L1 L Ds Ls Insert Screw T-Driver
TSB-25065 TXL-6
STD-V22040D S32 22.0 91 181 32 60 SPMX07T308
STD-V22540D S32 22.5 93 183 40 70 SPMX090408 TSB-35090
STD-V23040D S32 23.0 95 185 SPMX110408 TXL-15
STD-V23540D S32 23.5 97 187 SPMX140512
STD-V24040D S32 24.0 99 189 TSB-40100
STD-V24540D S32 24.5 101 191
STD-V25040D S32 25.0 103 193 TSB-50125 TXL-20
STD-V25540D S32 25.5 105 195
STD-V26040D S32 26.0 107 197
STD-V26540D S32 26.5 109 199
STD-V27040D S32 27.0 111 201
STD-V27540D S32 27.5 113 203
STD-V28040D S32 28.0 115 205
STD-V28540D S32 28.5 117 207
STD-V29040D S32 29.0 120 210
STD-V29540D S32 29.5 123 213
STD-V30040D S32 30.0 125 215
STD-V31040D S32 31.0 129 219
STD-V32040D S32 32.0 133 223
STD-V33040D S32 33.0 137 227
STD-V34040D S40 34.0 141 246
STD-V35040D S40 35.0 145 250
STD-V36040D S40 36.0 149 254
STD-V37040D S40 37.0 153 258
STD-V38040D S40 38.0 157 262
STD-V39040D S40 39.0 161 266
STD-V40040D S40 40.0 165 270
STD-V41040D S40 41.0 169 274
STD-V42040D S40 42.0 173 278
STD-V43040D S40 43.0 177 282
STD-V44040D S40 44.0 181 286
STD-V45040D S40 45.0 185 290
STD-V46040D S40 46.0 189 294
STD-V47040D S40 47.0 193 298
STD-V48040D S40 48.0 197 302
STD-V49040D S40 49.0 201 306
STD-V50040D S40 50.0 205 310

※ 가공경 ø40 이상을 범용선반에서 가공할 경우 센터붙이 타입 드릴(VLT, FXD, VMD) 사용을 권장합니다.
STD-V드릴과 체결되는 툴 홀더는 '사이드락 아버'(78페이지~90페이지)입니다.

※ 불규칙한 면을 가공할 경우에는 이송속도를 30%~50% 줄여 가공하여 주시기 바랍니다.

※ If you are working on the lathe, diameter ø40 or higher, we recommend using the VLT, FXD, VMD
The tool holder that locks with STD-V is Side Lock Arbor.(P.78~P.90)

※ When working on irregular (uneven) surfaces, please reduce the feed rate by 30~50%.

KOREA TECHNICS is The TOP of the world technics 27